Performance characteristics :
Back-seal packaging form, valve plug pump filling metering film sterilization, liquid material sterilization packaging finished bag is famous and reliable, health and safety assembly photoelectric control device to ensure the packaging bag pattern is complete?
Automatically complete the bag making, measuring, filling, sealing, cutting, counting, printing batch number. The shell and material contact parts are made of stainless steel.
This liquid automatic packaging machine is suitable for the packaging of milk, soy milk, soy sauce, vinegar, rice wine and various liquids
Operation points :
1.Pipe system cleaning
2. Connect the adapter to the supply pipe (note the seal).
3. Close the drain valve and open the cleaning return valve.
4. The liquid automatic packaging machine presses the "clean" button on the panel of the electric control box to enter the packaging machine cleaning state. The user can perform the cleaning operation according to his own cleaning process.
5. After the cleaning work is completed, press the "Cleaning" button, turn off the "Power Switch", and cut off the power of the whole machine.
6. Turn off the compressed air supply valve. This completes the entire packaging production process.
Daily maintenance of liquid automatic packaging machine :
1 The packaging machine must be reliably grounded.
2 Drain the water and fine dust in the air compressor's gas storage tank and air supply pipeline. At the same time, when the packaging machine is working, press the drain valve 4 (see Figure 22) at the lower part of the main pressure regulating valve TY0 to discharge it irregularly. Water in pressure regulator filter.
3.Each time you adjust the pressure of the air source, you must first turn the pressure regulating knob of the pressure regulating valve TY0 to the closed position. After the pressure of the air tank of the air compressor is greater than or equal to 0.7MPa, you can open the pressure regulating knob and adjust it to the packaging machine. The working pressure is 0.65MPa.
4 For the parts and fasteners that need to be dismantled during the production process, when they are reinstalled, they should be positioned correctly, firmly and reliably.
5 When the packaging machine is working normally, it is strictly forbidden to put hands or hard objects into the vertical seal and horizontal seal cutting mechanism; it is forbidden to touch the film roll with your hand or other items to avoid damaging the equipment and causing personal injury.
6 Dust, oil, water and other substances are not allowed on the packaging film. When the film is used up, it should be stopped and installed with a new film. The front end of the packaging film and the end of the roll-up film can be bonded with a film bonding device. Pay attention to the integrity of the packaging film pattern to improve the utilization of the film.
7 When the packaging machine is working, the finished bag should naturally fall on the slide and the transfer line by its own weight, and should not be touched by hand or other items to prevent adhesion and leakage. Finished bags should be naturally cooled for 2 to 3 seconds before handling, and should not be immediately squeezed or bumped to avoid leakage.
Technical parameters :
Filling capacity: 100-500ml / bag film width: 240 or 320 mm
Production efficiency: 1500-2000 bags / hour Packaging accuracy: ¡À 2%
Voltage: 220 volts Power: 1.5 kW Machine weight: 220 kg Dimensions: 750 ¡Á 750 ¡Á 1750 mm (self-priming pump)
Related liquid automatic packaging machine product links:
Small bag shower gel packaging machine
Automatic stand-up pouch hand washing liquid packaging machine
Paste, fluid automatic packaging machine
Wallpaper glue packaging machine